Have more questions about our 5' tall dry erase boards?

About 5' tall Dry Erase Boards

  • These 5' tall magnetic dry erase boards make the perfect alternative to expensive full-height dry erase walls. If you mount our 5' tall dry erase boards 30" from the floor that will place the bottom of the boards at table top. The tops of the boards will be 7 1/2' up on the wall and that is about a high as a 6' tall person can reach. This means that you are using 100% of your boards. You can see all the way to the bottom of the boards and write all the way to the top of the boards.

  • When you mount our 5' tall dry erase boards 30" from the floor you will not interfere with any phone, electrical or Internet connection boxes on that wall like you would when you mount a full-height wall.

  • These 5' tall white boards have a porcelain enamel steel writing surface laminated to 1/2" fiberboard core with a moisture barrier backing factory laminated at the rear of the panel to make for a true balanced white board panel.

  • If you want to use the dry erase boards for projection purposes then this will work but you may encounter what is called a "hot spot". The degree that this "hot spot" will interfere are highly dependent on a number of criteria including the projector type and brightness, projection angle, ambient light and seating angle.

  • If you are not going to write on the projection being shown onto the white board then we always recommend installing a projection screen instead. This will give you a better erasing white board and a cleaner, crisper image.

  • Our 5' tall aluminum framed dry erase boards come with E3 porcelain steel, magnetic receptive dry erase writing surface, a 1" face aluminum trim on three sides and a 2-3/4" deep full-length pen tray with 3/4" radius corners or ends for added safety.

  • The Deluxe Oak Framed dry erase boards have the same mid gloss writing surface but a unsurpassed 2" CW-1 Red Oak Trim with mitered corners on three sides and full-length 2-3/4" red oak pen tray standard. The trim and tray on these marker boards come with a clear lacquer finish.

  • The Maple framed marker boards are beautiful and they should ship from the factory in about 15 working days. The MH00 Series marker boards are made custom for OptiMA Inc. so they are not returnable.

  • The Mahogany framed marker boards are a solid oak wood stained in a rich mahogany finish. As with all of our dry erase boards, they will ship with a full-length marker tray. These boards are custom made for OptiMA Inc. and are not returnable. They should take about 15 working days as well to ship from the factory.

  • All of the 5' x 6' through the 5' x 12' marker boards are single continuous dry erase writing surfaces and shipped as one piece.

  • The 5' x 16' board can be shipped as a single piece or in two 8' sections connected with an H-Bar. The 5' x 20' marker boards are shipped as (2) two pieces because of additional weight, hanging and shipping concerns. The 5' x 24' is shipped as (3) three pieces for the same reasons. All sections will be connected with a white painted H-Bar.

  • These 5' tall dry erase boards are large... make sure that they will fit into your building, down the halls and into the room where you need them before you order them.

  • 5' tall dry erase boards are custom units and not returnable.