Simplify your whiteboard or chalkboard installation with factory suggested hardware.
We have three kits approved and suggested by Marsh Industries for installation of their boards and they will work for other manufacturer's boards as well including the OPTIMA boards.
These kits are packed based on the assumption that you have a 4' tall x 8' wide board so you may need to order more than one kit or you may end up with a little extra hardware.
The HD-408-AC is for thinner melamine or composition type boards (1/4" thick). For Marsh boards with a prefix of MA or AS. Also used on the OptiMA GR-Mel, RiteOn™ and RitePlus® boards. Kit includes 10 plastic wall anchors, 10 Each 1/4" L-Clips, 10 drill & tap screws and 10 each #10 Phillips screws.
The HD-408-BB the most popular, used for larger, heavier boards or Marsh boards with a prefix of: AA, AB, AF, AM, AN, AP, CA, CB, CW, LA, PR, WB, WF, WN and WP. Also used for the OPTIMA Great White boards with aluminum trims. Kit includes 10 plastic wall anchors, 10 Ea. 3/4" L-Clips, 10 drill & tap screws and 10 each #10 Phillips screws.
The HD-408-WC kits are recommended for wood framed boards and Marsh boards that have a prefix of AW, LW, MW, WM, WS and WR. 8 plastic anchors, 4 each 3/4" and 4 ea. 1" L-Clips, 8 drill & tap screws and 8 ea. #10 Phillips screws.
This installation hardware is recommended by Marsh industries but if you are not familiar with installation of items like whiteboards or chalkboards it is always recommended that you hire a professional or seek advice.
Heavier, larger boards or cabinets may also require the use of a panel adhesive on the backs of the boards or a heavy duty hardware kit. These kits do not include panel adhesive and may not work for all applications. You may want to also consult with the board manufacturer for advice.
Sold as complete sets only and ship by UPS.
|GR-HD-408-AC-NT||AC Thin Kit||UPS||0.5 lbs||$9.95|
|GR-HD-408-BB-NT||BB Heavy Kit||UPS||0.57 lbs||$11.95|
|OMI-HD-408-WC||WC Wood Kit||UPS||0.5 lbs||$16.95|