OptiMA® Double Sided Lap Boards with 3/4" Grid

OptiMA® 9" x 12" & 11" x 17" double sided individual student lap board with grids on one side and a white Melamine dry erase writing surface on the reverse side.

The grid pattern is a light gray 3/4" x 3/4" grid pattern. The grid is easily dark enough for the user to see but not so dark that it's not easy to work with. The grid is permanently printed onto the lap boards and then they are covered with one of the best dry erase writing surfaces in the world. This isn't a cheaper screen print that chips off or wears away. This grid pattern will never fade away.

The grid boards are approximately 1/8" thick and you can order a standard 9" wide x 12" long or a larger 12" wide x 17" long unit. Each comes with round corners and bull-nosed edges adding to the comfort and safety for the user. Our normal lead-time is about 3-5 working days to ship from the factory in Massachusetts. We accept school purchase orders.

Tip: It is not recommended to clean these boards with anything containing ammonia which is found in most glass cleaners.
It is not recommended to use damp / wet-erase markers with these boards. If it is necessary to use wet-erase markers, erase clean with a damp cloth within 24 hours.

9" x 12" Board Features:
• Actual Size: 8 15/16" x 11 13/16"
• Double Sided: Print on 1 Side / Plain White on Reverse
• Both Sides are Dry Erase
• Gray Grid is Roughly 3/4" x 3/4"
• 10 Blocks High x 14 Blocks Wide; 140 Blocks Total

11" x 17" Board Features:
• Double Sided: Print on 1 Side / Plain White on Reverse
• Both Sides are Dry Erase

Other Specifications:
• Medium density fiberboard material used is over 95% recycled materials
• Rounded corners for added safety
• Smooth Bull-nosed edges
• No Sharp Edges
• Lead-free
• Printed with eco-solvent inks
• Printed surface will not peel off or flake
• Clear coating will not peel off without excessive effort
• With proper care, clear coating should last for years of use
• Made in the U.S.A.
• Expo or other Bristle type erasers may permanently damage the writing surface.
• Rough Brown or White hand towels may scratch the writing surface.
• Do not use any cleaning chemicals which contain ammonia. Most glass cleaners contain ammonia.
• Do not use any type of scrubbing sponges or other abrasive to clean the boards.
• We strongly recommend using facial tissue or our Opti-Wipe™ washable micro-fiber cleaning cloths
• For best results use a quality dry erase marker and wipe each board clean before storage
• School Purchase Orders Accepted