Premium Aluminum Map and Display Rail with 1/4" Thick Forbo Tack Insert, Tan, 1" x 6'

SKU: EE-DISPL-106-T
1" Aluminum Map Rail w/Forbo Tack Insert, Choice of Color
SKU EE-DISPL-106-T
Color Nutmeg
Size 1" X 6'
  • Buy 15 for $54.11 each and save 5%
  • Buy 30 for $51.26 each and save 10%
Made in the USA
MyWhiteBoards Exclusive!
Over 30 Years in Business
50 Year Surface Warranty
Volume Discounts Available!
Need Guidance?

Our on-site experts are here to help!

Live Chat
(866) 366-1500

Size

1" X 6'

Questions and Answers about this product

1 Questions &  1Answers

Mikayla Boche from Minnesota asked:

Q
Hi! How can i cut this shorter? How is it supposed to be mounted to the wall? How does the cork get installed into the rail? Thanks!
Answer
Thank you for your question. The material can be cut with a simple hacksaw or circular saw with a diamond tip blade. The installer should furnish the required fasteners depending on the wall type, suggested mounting hardware #10 or #12 anchors and screws. Plan to install Snap-On clips every 16-24" apart. Mark on the wall where the clips will be installed while using a level (laser if available). Install anchors & screws on the center of the clip slot (in case of vertical adjustments are necessary). Be sure that the curved part is at the bottom & angled at the top. Once all clips are installed, snap on the map rail by hooking over the angled top of the clips & pushing them over the bottom curved part of the clips. Insert Forbo Cork strip into extrusion & push until the cork overhangs both ends. Cut off excess cork with a box knife to the end. Sile on any accessories. Install End Caps with provided screw. Installation complete.

Submitted by:  MWB Teamon December 30, 2024

Answer Image Answer Image Answer Image