.
Your Dry Erase Experts Est. 1987
52.95

OptiMA® 4' Long Atlas® Angled Corner Aluminum Marker Tray

SKU: GR-AtlasRC-04
MSRP:
$60.89
Our Price:
$52.95
You Save:
13%
Quantity
Made in
the USA
Expert Service
& Advice
MyWhiteBoards Exclusive!
Over 30 Years in Business
Need Guidance?
Our on-site experts are here to help!
To see More Options for this product: Click Here
4' Long Atlas® Angled Corner Aluminum Marker Tray

Atlas® aluminum marker ledges with a contemporary angle cut ends or corners. The smooth angle cut corner removes any sharp corners from the tray giving it a very finished and contemporary look.

Atlas® aluminum marker trays are made in the U.S.A. and every order is built to order. However, the trays still typically ship in as little as 2-5 working days. All of the sizes shown on this page ship by UPS as either a one-piece unit up to 8'or a two-piece unit in lengths up to 16'.

Two-piece units will ship with one end of each piece square and the other end will have an angle cut. Match up the two square corners and it gives the impression of a single continuous length of marker tray.

You can order trays from 10' up to 12' as a single piece unit by going to Extra Long Aluminum Marker Trays.

Atlas® aluminum marker trays are all made in the U.S.A. Note: Cut tolerances on all marker trays is +/- ¼"

Item Code Tray Size Shipping Method
GR-AtlasRC-18 18" Long Angled Corner Tray UPS
GR-AtlasRC-02 2' Long Angled Corner Tray UPS
GR-AtlasRC-03 3' Long Angled Corner Tray UPS
GR-AtlasRC-04 4' Long Angled Corner Tray UPS
GR-AtlasRC-05 5' Long Angled Corner Tray UPS
GR-AtlasRC-06 6' Long Angled Corner Tray UPS
GR-AtlasRC-07 7' Long Angled Corner Tray UPS
GR-AtlasRC-08 8' Long Angled Corner Tray UPS
GR-AtlasRC-10-2 10' Angle Corner 2 Piece UPS
GR-AtlasRC-12-2 12' Angle Corner 2 Piece UPS
GR-AtlasRC-14-2 14' Angle Corner 2 Piece UPS
GR-AtlasRC-16-2 16' Angle Corner 2 Piece UPS

UPS Dimensional Weights May Apply.

    Features:
  • Heavy Gauge Aluminum
  • Blade style marker tray with Smooth Angle Cut Ends
  • Back Panel is 2 1/8" High
  • Blade is 1/8" thick and 2 ¼" deep
  • 7/8" of the Back Panel is above the blade
  • 1 1/8" of the Back Panel is below the blade
  • Lower back panel can be drilled through for permanent installation with wall anchors and wall screws
  • Installation hardware is Not Included
  • Units up to 8' in length ship by UPS
  • Longer 2-Piece units available that ship by UPS
  • Note: UPS Dimensional Weights May Apply
  • Single section 10' and 12' units available. They ship by truck
  • Cut tolerance of +/- ¼"
  • Custom lengths available through customer service. 18" is the shortest length available
  • Lead-time is 2-5 business days shipping from Shrewsbury, MA
  • Made in the U.S.A.

Atlas® Marker Trays are sold exclusively on MyWhiteboards.com. Atlas® is a Registered Trademark of OptiMA Inc.
Review Summary
4.4
9 Reviews
5
56% (5)
4
33% (3)
3
11% (1)
2
0% (0)
1
0% (0)
89% Recommend this product (8 of 9 responses)
By Jack
Atlanta
Excellent product
February 29, 2020
Need mounting hardware
Merchant Response:Hello Jack, We don't provide hardware for these because we find that our customers install these in many different ways and have found there is not a one-size-fits-all option for this.
By Todd E.
Marietta, GA
Excellent product!
May 16, 2019
Exactly what we needed. Price was higher than we wanted to spend, but compared to what else was out there, this best suited our need.
By JRogers
Jackson, Mississippi
Perfect product for my needs
April 16, 2019
Easy to custom install and look great in my think room.
By Fred
East Coast, USA
Lovely -- Nicely Made -- Expensive
June 1, 2018
That pretty much sums-up my feelings. There are terrific: Attractive, nicely made. But really expensive for what they are. I would buy one for every office, but at this price, I really can't afford to.
By George T.
Design production Manager
October 7, 2016
Good product. A bit over priced. No Adhesive.
By Donald C.
chalk tray
August 30, 2016
great
By Sue W.
Great service and product as advertised
January 27, 2015
Great service and product as advertised
By janine h.
chalk wall ledge
June 16, 2014
Very Nice! thank you
By Dave H.
dry erase marker trays - all good
February 15, 2014
Pretty straight forward. received what was expected. Solid, clean, functional. Simple to mount with adhesive, dbl sided tape or screws with wall anchors.

Questions. and Answers about this product

www.P65Warnings.ca.gov

ServiceAlert

To our valued customers,

We apologize for the inconvenience, but our website is currently down for scheduled maintenance. If you would like to place an order, please call our sales team at 866-366-1500 and they will be happy to assist you. Thank you for your patience and understanding. .

As always, we look forward to serving you. If you have any questions, please feel free to contact us at info@mywhiteboards.com or 866-366-1500.