.
Your Dry Erase Experts Est. 1987
35.95

3' Long Atlas® Square Corner Aluminum Marker Tray

SKU: GR-AtlasSC-03
MSRP:
$41.34
Our Price:
$35.95
You Save:
13%
Quantity
Made in
the USA
Expert Service
& Advice
MyWhiteBoards Exclusive!
Over 30 Years in Business
Need Guidance?
Our on-site experts are here to help!
To see More Options for this product: Click Here
3' Long Atlas® Square Corner Aluminum Marker Tray

Atlas® aluminum marker trays have a blade style shelf or marker ledge that is 2 ¼" inches deep. The back of the tray is 2 1/8" wide and the ends of the ledge are cut square.

You can order full length trays up to 8' in length or two-piece trays up to 16' in length and they can all ship by UPS. Because the ends of the trays are square cut you can butt them up tightly against each other to create marker trays almost as long as you like without the added expense of shipping by truck. Altas® marker trays and ledges are carefully packed in heavy duty shipping tubes.

Extra-long Atlas® marker trays are also available as a single length up to 12' with either square cut corners or angle cut corners. These extra-long aluminum marker trays ship by truck.

Atlas® aluminum marker trays are all made in the U.S.A. Note: Cut tolerances on all marker trays is +/- ¼"

Item Code Tray Size Shipping Method
GR-AtlasSC-01 1' Long Square Corner Tray UPS
GR-AtlasSC-02 2' Long Square Corner Tray UPS
GR-AtlasSC-03 3' Long Square Corner Tray UPS
GR-AtlasSC-04 4' Long Square Corner Tray UPS
GR-AtlasSC-05 5' Long Square Corner Tray UPS
GR-AtlasSC-06 6' Long Square Corner Tray UPS
GR-AtlasSC-07 7' Long Square Corner Tray UPS
GR-AtlasSC-08 8' Long Square Corner Tray UPS
GR-AtlasSC-10-2 10' Square Corner 2 Piece UPS
GR-AtlasSC-12-2 12' Square Corner 2 Piece UPS
GR-AtlasSC-14-2 14' Square Corner 2 Piece UPS
GR-AtlasSC-16-2 16' Square Corner 2 Piece UPS
GR-AtlasSC-18 18" Long Square Corner Tray UPS

UPS Dimensional Weights May Apply.

    Features:
  • Heavy Gauge Aluminum
  • Blade style marker tray with 90-degree square corner
  • Back Panel is 2 1/8" High
  • Blade is 1/8" thick and 2 1/4" deep
  • 7/8" of the Back Panel is above the blade
  • 1 1/8" of the Back Panel is below the blade
  • Lower back panel can be drilled through for permanent installation with wall anchors and wall screws
  • Installation hardware is Not Included
  • Units up to 8' in length ship by UPS
  • UPS Dimensional Weights May Apply
  • Longer 2-Piece units available that ship by UPS
  • Single section 10' and 12' units available. They ship by truck
  • Cut tolerance of +/- ¼"
  • Custom lengths available through customer service
  • Lead-time is 2-5 business days shipping from Shrewsbury, MA
  • Made in the U.S.A.

Atlas® Marker Trays are sold exclusively on MyWhiteboards.com. Atlas® is a Registered Trademark of OptiMA Inc.
There are no questions or answers for this item.


4.7
3 Reviews
5
67% (2)
4
33% (1)
3
0% (0)
2
0% (0)
1
0% (0)
By Guy
Ohio
Exactly what I wanted
October 16, 2018
The marker/eraser tray is deep enough to allow the erasers to seat completely, with no overhang (a real plus). It is a sturdy extrusion ( no folds), and will last for many years
By james s.
Good quality product
October 17, 2015
Good as product that is part of a complete whiteboard
By Brian G.
Nice tray
February 19, 2015
Tray is quite nice, clean finish, no sharp edges, came packaged very well with no damage. Thought it would have holes pre-drilled for mounting to wall, but had to drill them myself.
Merchant Response:Thank you for your order and your kind words. We made the decision not to pre-drill holes so that more options are left to the customer. Our customers use these trays in many ways and mount them with a variety of hardware and even double-sided tape. Aluminum does tend to be a very easy metal to drill into so we hope you didn\'t have too much difficulty.

Questions and Answers about this product

There are no questions or answers for this item.


www.P65Warnings.ca.gov

COVID-19Current Status

To our valued customers,

We are open -- all products and lead times listed on the website are accurate. We will continue to monitor the situation and provide updates should anything change.

At OptiMA we are monitoring the latest news about COVID-19. And like many of you, our number one priority is keeping our customers, partners, suppliers and employees safe and healthy. We believe it's important to do our part to help reduce the transmission of COVID-19, while remaining accessible to our customers.

As we diligently follow the guidance and best practices put forth by the Centers for Disease Control and Prevention (CDC) regarding work-from-home practices and daily cleaning routines, we remain online and in operation.

As a US manufacturer we feel prepared to weather this storm and continue to serve our loyal customers in a safe and productive manner.

As always, we look forward to serving you. If you have any questions, please feel free to contact us at info@mywhiteboards.com or 866-366-1500.