OptiMA® Full Height Magnetic Dry Erase Whiteboard Wall

OptiMA
SKU: GR-GWFH
  • MyWhiteboards.com offers full height magnetic dry erase whiteboard walls made of high-quality E3 porcelain steel
  • The whiteboard walls are comprised of separate 4' wide panels with satin anodized aluminum trim on all sides and are connected using vertical white dry erase H-Bars
  • These walls provide a durable and long-lasting writing surface with a 50-year limited warranty, and while they can be used for projection, glare reduction techniques may be necessary for optimal results
SKU GR-GWFH
Made in the USA
50 Year Surface Warranty
Volume Discounts Available!
Need Guidance?

Our on-site experts are here to help!

Details

Full height magnetic dry erase whiteboard walls. Porcelain steel, full height, full wall, magnetic whiteboards. MyWhiteboards.com is one of the only places on the internet that you can find and order high quality, porcelain steel, dry erase boards making up an entire wall system with a 50-year limited warranty on the magnetic dry erase board writing surface.

Each of the magnetic whiteboards has satin anodized aluminum trim on all four sides of the dry erase boards and ships as separate pieces in 4' widths. A dry erase board 8' tall x 8' wide for instance will ship as (2) two 4' x 8' dry erase boards that are connected together during installation with a single 8' long, vertical, white dry erase H-Bar. The individual panels are joined with a white H-Bar that can be written on with a dry erase marker. This helps to keep your panels even and uniform across the entire length of the wall. H-Bars keep the two panels even from top to bottom counteracting any imperfections in your walls. Without the H-Bars your dry erase panels probably wouldn't line up properly.

Don't be fooled into using a cheaper product like Melamine marker board panels. You won't get the results you're looking for and the dry erase wall just will not last or erase the way you want it to. These full wall height dry erase boards are made with high-quality porcelain steel, magnetic receptive whiteboard panels.

Frequently asked question: Many people ask us if they can project onto these boards, the short answer is yes but don't expect to get the same results as you would with a projection screen. The same gloss that enables a marker-board to erase will cause glare when projected on, however, there are some things that can be done to reduce the effect of this glare. If you change the angle of the projection relative to your audience these can be an effective projection screen.

Workplace

Nothing gets the team on the same page like good communication, and as far as we're concerned, good communication Nothing gets the team on the good communication starts with a great dry erase board!

Shop Now

Household

Nothing gets the team on the same page like good communication, and as far as we're concerned, good communication Nothing gets the team on the good communication starts with a great dry erase board!

Shop Now

Size Chart

Model Number Shipping Method Shipping Weight Price Sale Price
GR-GWFH-608 162. $711.41
GR-GWFH-612 243. $1,089.66
GR-GWFH-616 324. $1,467.91
GR-GWFH-620 405. $1,846.16
GR-GWFH-624 486. $2,224.41
GR-GWFH-808 202. $894.16
GR-GWFH-812 303. $1,365.91
GR-GWFH-816 408. $1,837.66
GR-GWFH-820 520. $2,309.41
GR-GWFH-824 624. $2,780.31

Specification

  • Magnetic receptive
  • Installation hardware included
  • Assembly required
  • Individual panels ship separately
  • For best results secure to wall with industrial adhesive* (liquid nail)
  • These units are considered custom and cannot be returned
  • These units do not have a marker tray
  • We recommend our 18" Magtray
  • 50 Year Warranty on Porcelain steel writing surface
  • Proudly made in the USA
  • Must ship via freight truck. This product is Not eligible for our Free Freight program.

Accessories Product

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA
Multicolored Glass Board Button Magnets

Our Price: $2.45
OptiMA
OptiMA® Magtray® Magnetic Accessory Tray

Our Price: $29.56
OptiMA
OptiMA® Marker and Dry Erase Wiper Kit

Our Price: $7.95
OptiMA

Reviews Summary

4.5

2 reviews

Write a Review
  • 5
    1
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    0
Perfect, Thanks
This whiteboard is very high quality and installed very easily with the hardware supplied. The only issue I had was one of the staples punctured the H bracket during manufacturing, which made the install a little tricky. I had to pull part of the staple out in order for the board to slide into that side of the H bracket.

Questions and Answers about this product

51 Questions &  51Answers

JEFFERY DAHLBERG from OKC asked:

Q

Tell me about the strength of the magnetic board?

Will it hold big, strong magnets?

Answer
Hello Jeffery, 

The writing surface consists of a thin porcelain coating on steel. It should sufficiently hold any big stong magnet that it should reasonably be expected to. It should hold at least as strong as a steel filing cabinet.

Submitted by:  MWB Teamon June 4, 2024

Mary from New Orleans asked:

Q
Is there any "ghosting" from markers on these boards?


Answer
Hello Mary, 

These boards are made with the highest quality porcelain steel and they will not ghost. If they ever need a deeper cleaning to remove stubborn markings, common isopropyl alcohol mixed 50/50 with water, will do wonders. If this does happen, it is normally caused by residue on the surface be it from cleaners or environmental contaminants and not the board itself. The alcohol serves to clean these contaminants from the porcelain surface. 

Submitted by:  MWB Teamon June 4, 2024

Meg Claveau from Roseville, CA asked:

Q
I need more information regarding installation. Do you have any pictures of the hardware?
Answer
Hello Meg, 

Our full height walls are installed with L brackets like those seen on this page https://mywhiteboards.com/boinhaki.html

Installation instructions are available on the Specifications tab on this page. 

If you have any further questions please feel free to contact us at 1-866-366-1500 

Submitted by:  MWB Teamon June 4, 2024

Cynthia from Chicago asked:

Q
Does the full height 6x12’ 3 panel whiteboard come with all the necessary equipment/hardware for installation? 
Answer
Hello Cynthia,

The board comes with installation hardware for a standard installation.

Submitted by:  MWB Teamon June 4, 2024

Raphael from Boston, Massachussetts asked:

Q

Hi,

Can the whiteboard be mounted on a corner? For instance, could 2 of the 3 panels of the 6'x12' board be mounted on one wall while the third panel is mounted on the adjacent wall?

Or do the panels have to be mounted on the same wall in order to guarantee structural integrity?

Thanks!

Answer
Hello Raphael,

These boards are designed so that the individual panels connect with a special H-Bar that would not handle a 90-degree corner. 

So to answer your question, out of the box, this would not work, though anything is possible with a good carpenter.

That said, we do have products that may suit your project better; from Opti-RIte wallpapers, skins, and unframed panels. If you would care to give our product specialists a call at 1-866-366-1500 we would be happy to discuss your project with you and help you find the right product for your needs, 

Submitted by:  MWB Teamon June 4, 2024

Lisa from Pomona, CA asked:

Q
Can these panels be cut to allow for electrical and data outlets, or to work around windows?
Answer
No I'm sorry but they can't. Another alternative is to look at the extra large 5' tall Great White. These are very popular for this very reason.

Submitted by:  MWB Teamon June 4, 2024

Mardell Antolin from Oregon asked:

Q
Do you have an example of what the installation hardware looks like? 
Answer
Hi Mardell,


The full height walls are installed using L-brackets.  The L-brackets can be seen here as we do sell these hardware kits individually:  

https://mywhiteboards.com/boinhaki.html


These are fastened at the top and bottom of the board and they are essentially invisible from any viewing area.  Further, when drilled through studs, these provide a very strong mount. 


If we can answer any other questions, please just let us know!


Best,

Philip

Submitted by:  MWB Teamon June 4, 2024

LEAH from CO asked:

Q
can these be mounted outdoors?
Answer
The boards can be mounted outdoors but there is no warranty for an outdoor mount. We have no way of knowing how long they will last. 

Submitted by:  MWB Teamon June 4, 2024

Jules Coleman from AZ asked:

Q
what would you recommend if we were to want a whiteboard or possibly whiteboards to cover a wall that is 8.5ft x 20.4ft?
Answer
We offer a 8ft x 20ft board for $2029.76 in the  link below 


https://mywhiteboards.com/whiteboard.html 

Comes in 5 panels to fit in most office spaces

Submitted by:  MWB Teamon June 4, 2024

jamey a miller from IN asked:

Q
How well will a projector work on this board?
Answer
Frequently asked question: Many people ask us if they can project onto these boards, the short answer is yes but don't expect to get the same results as you would with a projection screen. The same gloss that enables a marker-board to erase will cause glare when projected on, however, there are some things that can be done to reduce the effect of this glare. If you change the angle of the projection relative to your audience these can be an effective projection screen.

Submitted by:  MWB Teamon June 4, 2024

Harold from NYC asked:

Q
The "H" bracket between the panels seems to be an inch or so wide.  Does it have white board properties that will keep it from staining over time and wipe clean with use?
Answer
Hi Harold, yes the H bars have a whiteboard surface!

Submitted by:  MWB Teamon June 4, 2024

Tess from Indianapolis, IN asked:

Q
I would like 6' tall x 23' wide.  Would you custom cut one panel?  
Answer
Hi Tess, unfortunately these only come in standard sizes available using the drop down. We do have other full wall dry erase board options- heavy duty magnetic dry erase wallpaper, skins, etc. Here is a link: https://mywhiteboards.com/polritdryerw.html If you have additional questions give us a call at 866-366-1500 - I hope that helps!

Submitted by:  MWB Teamon June 4, 2024

Michael from Los Angeles asked:

Q
What is the recommended method for attaching the panels to an existing wall? 


Answer
Hi Michael, 


Thank you for your question. When your board arrives, it will have instructions and all the tools you need to mount correctly. Your board will be mounted with L Brackets onto the wall, which will hold up your board. 


Feel free to reach out if you have any more question, or call us at (866)-366-1500. 

Submitted by:  MWB Teamon June 4, 2024

Jennifer Crouse from VA asked:

Q
Is there a way to "lean" this against a wall if only using it temporarily, for example, at a conference in a hotel? 
Answer
Hi Jennifer,


For safety reasons, we do not recommend leaning or fixing these boards. They are designed to be hung securely on the wall. Please call us at (866)-366-1500, and our Customer Service team would love to help you find a product that will fit your needs. Thank you! 

Submitted by:  MWB Teamon June 4, 2024

Marcia from 28312 asked:

Q
Hey, Is this board Fire rated and safe to hang at a school, if so how can I get this information? Thank you
Answer
Hi Marcia.


We do have this information to provide to you. If you could give us a call at (866)-566-1500, we can give you this information and answer any more questions that you may have. Thank you! 

Submitted by:  MWB Teamon June 4, 2024

Tess from Indianapolis asked:

Q
I would like to hang these on the modular walls shown, but the strips that joins the wall panels stick out about an 1/8 inch.  Can these white boards accommodate that?
Answer
Good Morning Tess,


I do not believe the 1/8'' strips will be an issue. Our full height walls are mounted at the top and bottom of each panels with screws and L brackets. 

My one concern would be, are the modular walls a solid panel? and are they attached to the building outside wall? 

Due to the weight and height our panels, it might be too much for the modular walls to hold. 


Thanks

Chris

 

Chris Stewart - Account Manager

ChrisS@OptiMACompanies.com

Ph: 866-366-1500 x28

Fax: 508-393-6688

 

Optima Inc, 220 Cherry St., Shrewsbury MA 01545

MyWhiteBoards.com |PrintedDryErase.com

Submitted by:  MWB Teamon June 4, 2024

Gerry from Santa Fe, NM asked:

Q
Can the panels be mounted at ground level so they are flush with floor.
Answer
Hi Gerry, 


These panels come with a hardware kit, an H-bar, and tools to hang this board where you please—allowing you to choose how low or high you wish it where it will be placed on the wall. 

Submitted by:  MWB Teamon June 4, 2024

Rick Mayo from Benton Harbor, MI asked:

Q
If I want to cover an entire wall, can I cut these panels to size?
Answer
Hello, 

We do not cut these panels to size. If you are looking to have a full wall I would recommend our Opti Dry Erase Products.

Our Magnetic Self-Adhesive Opti Wallpaper is easy to install and can be cut down to any size with a pair of scissors. 

Best, 

Alex

Submitted by:  MWB Teamon June 4, 2024

Norma from Albuquerque, NM asked:

Q
Can the boards be attached to folding room dividers, with each board fully attached to each folding panel?
Answer
Hi Norma,

Thank you for your question! The panels are designed to be connected together, so I'm not sure if this product will work on a folding divider. Please call us at 866-366-1500 and our customer service team would love to help you find a product perfect for your needs! 

Submitted by:  MWB Teamon June 4, 2024

Gwendolyn Mallory from Boston, Massachusetts asked:

Q
Is this board able to hold heavier items magnetically (magnetic file folders).
Answer
Yes! I think you may end up being more limited with the weight of the magnet holding the file folder itself (for example, if the magnet is too heavy it may slide down).

Submitted by:  MWB Teamon June 4, 2024

Larry Smith from AZ asked:

Q
Can these boards take a vinyl overlay and still maintain the magnetic qualities.
Answer
Hi Larry,


In theory, yes. However, if you're looking for a full height wall with a custom print on it, we highly recommend our custom printed full height walls instead. Check them out here! 

Submitted by:  MWB Teamon June 4, 2024

Karla B. from Austin asked:

Q
What is the thickness of a panel
Answer
Hello Karla,


Each panel is 1/2" thick. Let us know if you have any further questions, feel free to contact us at 866-366-1500.


Have a great day!

Submitted by:  MWB Teamon June 4, 2024

Melanie from Boise, Idaho asked:

Q
Is it possible to get a 36" x 120" (3' x 10') Magnetic Whiteboard and if so how much?
Answer
Hello Melanie,


For questions about custom sizes and pricing, please contact our sales team at 866-366-1500. 


Have a great day!

Submitted by:  MWB Teamon June 4, 2024

kevin bennett from New Brunswick,nj asked:

Q
Can these be cut to custom sizing?
Answer

Hello Kevin,


Of course! I recommend calling us directly at 866-366-1500 for specifics and someone can help you!


Have a great weekend

Submitted by:  MWB Teamon June 4, 2024

Bob from CA asked:

Q
Can electrical openings be cut into the panels?
Answer
Hello Bob,


Yes, but you will need a carbide or diamond tip saw blade or drill bit to cut through the porcelain steel. And be careful, of course!


Have a great day!

Submitted by:  MWB Teamon June 4, 2024

JEFFERY DAHLBERG from OKC asked:

Q

Tell me about the strength of the magnetic board?

Will it hold big, strong magnets?

Answer
Hello Jeffery, 

The writing surface consists of a thin porcelain coating on steel. It should sufficiently hold any big stong magnet that it should reasonably be expected to. It should hold at least as strong as a steel filing cabinet.

Submitted by:  MWB Teamon June 6, 2024

Mary from New Orleans asked:

Q
Is there any "ghosting" from markers on these boards?


Answer
Hello Mary, 

These boards are made with the highest quality porcelain steel and they will not ghost. If they ever need a deeper cleaning to remove stubborn markings, common isopropyl alcohol mixed 50/50 with water, will do wonders. If this does happen, it is normally caused by residue on the surface be it from cleaners or environmental contaminants and not the board itself. The alcohol serves to clean these contaminants from the porcelain surface. 

Submitted by:  MWB Teamon June 6, 2024

Meg Claveau from Roseville, CA asked:

Q
I need more information regarding installation. Do you have any pictures of the hardware?
Answer
Hello Meg, 

Our full height walls are installed with L brackets like those seen on this page https://mywhiteboards.com/boinhaki.html

Installation instructions are available on the Specifications tab on this page. 

If you have any further questions please feel free to contact us at 1-866-366-1500 

Submitted by:  MWB Teamon June 6, 2024

Cynthia from Chicago asked:

Q
Does the full height 6x12’ 3 panel whiteboard come with all the necessary equipment/hardware for installation? 
Answer
Hello Cynthia,

The board comes with installation hardware for a standard installation.

Submitted by:  MWB Teamon June 6, 2024

Raphael from Boston, Massachussetts asked:

Q

Hi,

Can the whiteboard be mounted on a corner? For instance, could 2 of the 3 panels of the 6'x12' board be mounted on one wall while the third panel is mounted on the adjacent wall?

Or do the panels have to be mounted on the same wall in order to guarantee structural integrity?

Thanks!

Answer
Hello Raphael,

These boards are designed so that the individual panels connect with a special H-Bar that would not handle a 90-degree corner. 

So to answer your question, out of the box, this would not work, though anything is possible with a good carpenter.

That said, we do have products that may suit your project better; from Opti-RIte wallpapers, skins, and unframed panels. If you would care to give our product specialists a call at 1-866-366-1500 we would be happy to discuss your project with you and help you find the right product for your needs, 

Submitted by:  MWB Teamon June 6, 2024

Lisa from Pomona, CA asked:

Q
Can these panels be cut to allow for electrical and data outlets, or to work around windows?
Answer
No I'm sorry but they can't. Another alternative is to look at the extra large 5' tall Great White. These are very popular for this very reason.

Submitted by:  MWB Teamon June 6, 2024

Mardell Antolin from Oregon asked:

Q
Do you have an example of what the installation hardware looks like? 
Answer
Hi Mardell,


The full height walls are installed using L-brackets.  The L-brackets can be seen here as we do sell these hardware kits individually:  

https://mywhiteboards.com/boinhaki.html


These are fastened at the top and bottom of the board and they are essentially invisible from any viewing area.  Further, when drilled through studs, these provide a very strong mount. 


If we can answer any other questions, please just let us know!


Best,

Philip

Submitted by:  MWB Teamon June 6, 2024

LEAH from CO asked:

Q
can these be mounted outdoors?
Answer
The boards can be mounted outdoors but there is no warranty for an outdoor mount. We have no way of knowing how long they will last. 

Submitted by:  MWB Teamon June 6, 2024

Jules Coleman from AZ asked:

Q
what would you recommend if we were to want a whiteboard or possibly whiteboards to cover a wall that is 8.5ft x 20.4ft?
Answer
We offer a 8ft x 20ft board for $2029.76 in the  link below 


https://mywhiteboards.com/whiteboard.html 

Comes in 5 panels to fit in most office spaces

Submitted by:  MWB Teamon June 6, 2024

jamey a miller from IN asked:

Q
How well will a projector work on this board?
Answer
Frequently asked question: Many people ask us if they can project onto these boards, the short answer is yes but don't expect to get the same results as you would with a projection screen. The same gloss that enables a marker-board to erase will cause glare when projected on, however, there are some things that can be done to reduce the effect of this glare. If you change the angle of the projection relative to your audience these can be an effective projection screen.

Submitted by:  MWB Teamon June 6, 2024

Harold from NYC asked:

Q
The "H" bracket between the panels seems to be an inch or so wide.  Does it have white board properties that will keep it from staining over time and wipe clean with use?
Answer
Hi Harold, yes the H bars have a whiteboard surface!

Submitted by:  MWB Teamon June 6, 2024

Tess from Indianapolis, IN asked:

Q
I would like 6' tall x 23' wide.  Would you custom cut one panel?  
Answer
Hi Tess, unfortunately these only come in standard sizes available using the drop down. We do have other full wall dry erase board options- heavy duty magnetic dry erase wallpaper, skins, etc. Here is a link: https://mywhiteboards.com/polritdryerw.html If you have additional questions give us a call at 866-366-1500 - I hope that helps!

Submitted by:  MWB Teamon June 6, 2024

Michael from Los Angeles asked:

Q
What is the recommended method for attaching the panels to an existing wall? 


Answer
Hi Michael, 


Thank you for your question. When your board arrives, it will have instructions and all the tools you need to mount correctly. Your board will be mounted with L Brackets onto the wall, which will hold up your board. 


Feel free to reach out if you have any more question, or call us at (866)-366-1500. 

Submitted by:  MWB Teamon June 6, 2024

Jennifer Crouse from VA asked:

Q
Is there a way to "lean" this against a wall if only using it temporarily, for example, at a conference in a hotel? 
Answer
Hi Jennifer,


For safety reasons, we do not recommend leaning or fixing these boards. They are designed to be hung securely on the wall. Please call us at (866)-366-1500, and our Customer Service team would love to help you find a product that will fit your needs. Thank you! 

Submitted by:  MWB Teamon June 6, 2024

Marcia from 28312 asked:

Q
Hey, Is this board Fire rated and safe to hang at a school, if so how can I get this information? Thank you
Answer
Hi Marcia.


We do have this information to provide to you. If you could give us a call at (866)-566-1500, we can give you this information and answer any more questions that you may have. Thank you! 

Submitted by:  MWB Teamon June 6, 2024

Tess from Indianapolis asked:

Q
I would like to hang these on the modular walls shown, but the strips that joins the wall panels stick out about an 1/8 inch.  Can these white boards accommodate that?
Answer
Good Morning Tess,


I do not believe the 1/8'' strips will be an issue. Our full height walls are mounted at the top and bottom of each panels with screws and L brackets. 

My one concern would be, are the modular walls a solid panel? and are they attached to the building outside wall? 

Due to the weight and height our panels, it might be too much for the modular walls to hold. 


Thanks

Chris

 

Chris Stewart - Account Manager

ChrisS@OptiMACompanies.com

Ph: 866-366-1500 x28

Fax: 508-393-6688

 

Optima Inc, 220 Cherry St., Shrewsbury MA 01545

MyWhiteBoards.com |PrintedDryErase.com

Submitted by:  MWB Teamon June 6, 2024

Gerry from Santa Fe, NM asked:

Q
Can the panels be mounted at ground level so they are flush with floor.
Answer
Hi Gerry, 


These panels come with a hardware kit, an H-bar, and tools to hang this board where you please—allowing you to choose how low or high you wish it where it will be placed on the wall. 

Submitted by:  MWB Teamon June 6, 2024

Rick Mayo from Benton Harbor, MI asked:

Q
If I want to cover an entire wall, can I cut these panels to size?
Answer
Hello, 

We do not cut these panels to size. If you are looking to have a full wall I would recommend our Opti Dry Erase Products.

Our Magnetic Self-Adhesive Opti Wallpaper is easy to install and can be cut down to any size with a pair of scissors. 

Best, 

Alex

Submitted by:  MWB Teamon June 6, 2024

Norma from Albuquerque, NM asked:

Q
Can the boards be attached to folding room dividers, with each board fully attached to each folding panel?
Answer
Hi Norma,

Thank you for your question! The panels are designed to be connected together, so I'm not sure if this product will work on a folding divider. Please call us at 866-366-1500 and our customer service team would love to help you find a product perfect for your needs! 

Submitted by:  MWB Teamon June 6, 2024

Gwendolyn Mallory from Boston, Massachusetts asked:

Q
Is this board able to hold heavier items magnetically (magnetic file folders).
Answer
Yes! I think you may end up being more limited with the weight of the magnet holding the file folder itself (for example, if the magnet is too heavy it may slide down).

Submitted by:  MWB Teamon June 6, 2024

Larry Smith from AZ asked:

Q
Can these boards take a vinyl overlay and still maintain the magnetic qualities.
Answer
Hi Larry,


In theory, yes. However, if you're looking for a full height wall with a custom print on it, we highly recommend our custom printed full height walls instead. Check them out here

Submitted by:  MWB Teamon June 6, 2024

Karla B. from Austin asked:

Q
What is the thickness of a panel
Answer
Hello Karla,


Each panel is 1/2" thick. Let us know if you have any further questions, feel free to contact us at 866-366-1500.


Have a great day!

Submitted by:  MWB Teamon June 6, 2024

Melanie from Boise, Idaho asked:

Q
Is it possible to get a 36" x 120" (3' x 10') Magnetic Whiteboard and if so how much?
Answer
Hello Melanie,


For questions about custom sizes and pricing, please contact our sales team at 866-366-1500. 


Have a great day!

Submitted by:  MWB Teamon June 6, 2024

kevin bennett from New Brunswick,nj asked:

Q
Can these be cut to custom sizing?
Answer

Hello Kevin,


Of course! I recommend calling us directly at 866-366-1500 for specifics and someone can help you!


Have a great weekend

Submitted by:  MWB Teamon June 6, 2024

Bob from CA asked:

Q
Can electrical openings be cut into the panels?
Answer
Hello Bob,


Yes, but you will need a carbide or diamond tip saw blade or drill bit to cut through the porcelain steel. And be careful, of course!


Have a great day!

Submitted by:  MWB Teamon June 6, 2024

Ginny from Indiana asked:

Q
What gauge steel are these made of? I need something similar to thick 14-gauge steel
Answer
Thank you for your question. Our boards are made with 28-gauge steel.

Submitted by:  MWB Team on October 14, 2024