Expensive but worth it
February 15, 2014
Read this review until the end - it does work!
Read installation directions - pretty straight forward. Used extreme care to prep surface and mount - very carefully. Even purchased an \"installation kit\" (which was a $20 rip-off - see specific review).
Had many wrinkles and bubbles after installing first 50\"x60\" section. No matter how hard we tried, couldn\'t get out final wrinkles and bubbles. Even tried blow dryer to \"shrink\" the surfaces - no luck.
GREAT NEWS - the next morning, a simple hand rubbing/smoothing of the surface removed all wrinkles and bubbles. product adhered well and away we go. Suggestion: read directions, instal carefully, press wrinkles outward from center to edges. Work it as much as possible. If wrinkles remain, let it set up for at least 12 hours, (we waited 24 hours), then work wrinkles out again. Great results for the 10 50\"x60\" sections we installed over painted drywall surfaces. (Interior office walls) Only complaint, it is expensive, especially buying 50 linear feet.